Composite Push-to-Connect Tube Fittings
Male Swivel Elbow - Metric
Composite Push-to-Connect Advantages
This fitting was designed to meet the needs of the motion control industry where fast assembly, dis-assembly and re-assembly is important. No special tools needed for tube assembly, just insert the tubing until it bottoms.
Composite Push-to-Connect is designed to be used without a tube support, providing full flow through the tubing. The grab ring design grips the tubing securely to provide retention.
Composite Push-to-Connect external pipe threads come with a preapplied white PCTFE sealant. Positional external pipe threaded ends are featured on shapes for installion in compact areas and for precise positioning.
Specifications:
This fitting was designed to meet the needs of the motion control industry where fast assembly, dis-assembly and re-assembly is important. No special tools needed for tube assembly, just insert the tubing until it bottoms.
Composite Push-to-Connect is designed to be used without a tube support, providing full flow through the tubing. The grab ring design grips the tubing securely to provide retention.
Composite Push-to-Connect external pipe threads come with a preapplied white PCTFE sealant. Positional external pipe threaded ends are featured on shapes for installion in compact areas and for precise positioning.
Specifications:
- -4ºF to +175ºF at up to 290 psi depending on tubing being used.
- Vacuum applications are dependent upon temperature and type of tubing being used.
- Tube sizes are determined by the number of sixteenths of an inch in the tube O.D.
Composite Push-to-Connect fittings were designed as an economical alternative for pneumatic applications. Ready to use, compact,one-piece fitting for use with most thermoplastic tubing.
Composite Push-to-Connect shaped fittings have a composite body with nickel plated brass componentry.
| Materials | ||
| Component | Material | |
| Body | Glass Reinforced Nylon 6.6 | |
| Collar | Nylon | |
| Gripping Ring | Stainless Steel | |
| D Seal | Nitrile | |
| O-Ring | Nitrile | |
| Base | Nickel plated brass with Thread sealant on tapered components and captive seal on parallel threads | |
| Male Swivel Elbow - Metric | |||||
| Tube O.D. |
Thread | Hex C |
Length L |
H | Part Number |
| mm | BSPT | mm | mm | mm | |
| 4 | 1/8 | 10 | 14.0 | 13.5 | P102202 |
| 4 | 1/4 | 14 | 14.0 | 14.0 | P102203 |
| 6 | 1/8 | 10 | 16.0 | 15.5 | P102212 |
| 6 | 1/4 | 14 | 16.0 | 16.0 | P102213 |
| 8 | 1/8 | 10 | 23.0 | 19.0 | P102217 |
| 8 | 1/4 | 14 | 23.0 | 18.0 | P102218 |
| 8 | 3/8 | 17 | 23.0 | 18.0 | P102219 |
| 10 | 1/4 | 15 | 26.5 | 22.0 | P102223 |
| 10 | 3/8 | 17 | 26.5 | 22.0 | P102224 |
| 10 | 1/2 | 21 | 26.5 | 22.0 | P102225 |
| 12 | 1/4 | 15 | 31.0 | 25.0 | P102228 |
| 12 | 3/8 | 17 | 31.0 | 25.0 | P102229 |
| 12 | 1/2 | 21 | 31.0 | 25.0 | P102230 |
| 14 | 3/8 | 20 | 35.5 | 30.5 | P102234 |
| 14 | 1/2 | 24 | 35.5 | 28.5 | P102235 |
