Composite Push-to-Connect Tube Fittings
Male Standpipe - Inch
Composite Push-to-Connect Advantages
This fitting was designed to meet the needs of the motion control industry where fast assembly, dis-assembly and re-assembly is important. No special tools needed for tube assembly, just insert the tubing until it bottoms.
Composite Push-to-Connect is designed to be used without a tube support, providing full flow through the tubing. The grab ring design grips the tubing securely to provide retention.
Composite Push-to-Connect external pipe threads come with a preapplied white PCTFE sealant. Positional external pipe threaded ends are featured on shapes for installion in compact areas and for precise positioning.
Specifications:
This fitting was designed to meet the needs of the motion control industry where fast assembly, dis-assembly and re-assembly is important. No special tools needed for tube assembly, just insert the tubing until it bottoms.
Composite Push-to-Connect is designed to be used without a tube support, providing full flow through the tubing. The grab ring design grips the tubing securely to provide retention.
Composite Push-to-Connect external pipe threads come with a preapplied white PCTFE sealant. Positional external pipe threaded ends are featured on shapes for installion in compact areas and for precise positioning.
Specifications:
- -4ºF to +175ºF at up to 290 psi depending on tubing being used.
- Vacuum applications are dependent upon temperature and type of tubing being used.
- Tube sizes are determined by the number of sixteenths of an inch in the tube O.D.
Composite Push-to-Connect fittings were designed as an economical alternative for pneumatic applications. Ready to use, compact,one-piece fitting for use with most thermoplastic tubing.
Composite Push-to-Connect shaped fittings have a composite body with nickel plated brass componentry.
| Materials | ||
| Component | Material | |
| Body | Glass Reinforced Nylon 6.6 | |
| Collar | Nylon | |
| Gripping Ring | Stainless Steel | |
| D Seal | Nitrile | |
| O-Ring | Nitrile | |
| Base | Nickel plated brass with Thread sealant on tapered components and captive seal on parallel threads | |
| Male Standpipe - Inch | |||||
| Tube O.D. |
Thread | Hex C |
H | N | Part Number |
| inch | NPT/UNF | mm | inch | inch | |
| 5/32 | 10-32 | 8 | 1.24 | - | P52710 |
| 5/32 | 1/8 | 11 | 1.02 | 0.57 | P52712 |
| 5/32 | 1/4 | 14 | 1.04 | 0.59 | P52714 |
| 1/4 | 1/8 | 11 | 1.18 | 0.61 | P52742 |
| 1/4 | 1/4 | 14 | 1.12 | 0.57 | P52744 |
| 5/16 | 1/8 | 11 | 1.16 | 0.43 | P52752 |
| 5/16 | 1/4 | 14 | 1.12 | 0.39 | P52754 |
| 3/8 | 1/8 | 15 | 1.75 | 0.65 | P52762 |
| 3/8 | 1/4 | 15 | 1.42 | 0.67 | P52764 |
| 3/8 | 3/8 | 17 | 1.42 | 0.61 | P52766 |
| 1/2 | 3/8 | 17 | 1.44 | 0.37 | P52786 |
| 1/2 | 1/2 | 21 | 1.46 | 0.39 | P52788 |
