Female Swivel Elbow - Inch

Composite Push-to-Connect Advantages

This fitting was designed to meet the needs of the motion control industry where fast assembly, is-assembly and re-assembly is important. No special tools needed for tube assembly, just insert the tubing until it bottoms.

Composite Push-to-Connect is designed to be used without a tube support, providing full flow through the tubing. The grab ring design grips the tubing securely to provide retention.

Composite Push-to-Connect external pipe threads come with a preapplied white PCTFE sealant. Positional external pipe threaded ends are featured on shapes for installion in compact areas and for precise positioning.

  • -4ºF to +175ºF at up to 290 psi depending on tubing being used.
  • Vacuum applications are dependent upon temperature and type of tubing being used.
  • Tube sizes are determined by the number of sixteenths of an inch in the tube O.D.

Composite Push-to-Connect fittings were designed as an economical alternative for pneumatic applications. Ready to use, compact, one-piece fitting for use with most thermoplastic tubing.

Composite Push-to-Connect shaped fittings have a composite body with nickel plated brass componentry.

Component Material
Body Glass Reinforced Nylon 6.6
Collar Nylon
Gripping Ring Stainless Steel
D Seal Nitrile
O-Ring Nitrile
Base Nickel plated brass with Thread sealant on tapered components and captive seal on parallel threads
Female Swivel Elbow - Inch
Thread Hex
H Part
inch NPT mm inch inch  
1/8 1/8 13 0.57 0.91 P57022
5/32 1/8 13 0.55 0.91 P57012
5/32 1/4 16 0.55 1.08 P57014
1/4 1/8 13 0.71 1.02 P57042
1/4 1/4 16 0.71 1.18 P57044
5/16 1/8 13 0.91 1.12 P57052
5/16 1/4 16 0.91 1.28 P57054
3/8 1/4 16 1.04 1.52 P57064
1/2 3/8 22 1.38 1.88 P57086