Composite Push-to-Connect Tube Fittings
Female Branch Tee - Inch
Composite Push-to-Connect Advantages
This fitting was designed to meet the needs of the motion control industry where fast assembly, dis-assembly and re-assembly is important. No special tools needed for tube assembly, just insert the tubing until it bottoms.
Composite Push-to-Connect is designed to be used without a tube support, providing full flow through the tubing. The grab ring design grips the tubing securely to provide retention.
Composite Push-to-Connect external pipe threads come with a preapplied white PCTFE sealant. Positional external pipe threaded ends are featured on shapes for installion in compact areas and for precise positioning.
Specifications:
This fitting was designed to meet the needs of the motion control industry where fast assembly, dis-assembly and re-assembly is important. No special tools needed for tube assembly, just insert the tubing until it bottoms.
Composite Push-to-Connect is designed to be used without a tube support, providing full flow through the tubing. The grab ring design grips the tubing securely to provide retention.
Composite Push-to-Connect external pipe threads come with a preapplied white PCTFE sealant. Positional external pipe threaded ends are featured on shapes for installion in compact areas and for precise positioning.
Specifications:
- -4ºF to +175ºF at up to 290 psi depending on tubing being used.
- Vacuum applications are dependent upon temperature and type of tubing being used.
- Tube sizes are determined by the number of sixteenths of an inch in the tube O.D.
Composite Push-to-Connect fittings were designed as an economical alternative for pneumatic applications. Ready to use, compact,one-piece fitting for use with most thermoplastic tubing.
Composite Push-to-Connect shaped fittings have a composite body with nickel plated brass componentry.
| Materials | ||
| Component | Material | |
| Body | Glass Reinforced Nylon 6.6 | |
| Collar | Nylon | |
| Gripping Ring | Stainless Steel | |
| D Seal | Nitrile | |
| O-Ring | Nitrile | |
| Base | Nickel plated brass with Thread sealant on tapered components and captive seal on parallel threads | |
| Female Branch Tee - Inch | |||||
| Tube O.D. |
Thread | Hex C |
L2 | H | Part Number |
| inch | NPT | mm | inch | inch | |
| 1/8 | 1/8 | 13 | 0.57 | 0.99 | P57422 |
| 5/32 | 1/8 | 13 | 0.55 | 0.91 | P57412 |
| 5/32 | 1/4 | 16 | 0.55 | 1.08 | P57414 |
| 1/4 | 1/8 | 13 | 0.71 | 1.02 | P57442 |
| 1/4 | 1/4 | 16 | 0.71 | 1.18 | P57444 |
| 5/16 | 1/8 | 13 | 0.91 | 1.24 | P57452 |
| 5/16 | 1/4 | 16 | 0.91 | 1.40 | P57454 |
| 3/8 | 1/4 | 16 | 1.04 | 1.60 | P57464 |
| 1/2 | 3/8 | 22 | 1.38 | 1.88 | P57486 |
