Composite Push-to-Connect Tube Fittings
Double Y Union - Inch
Composite Push-to-Connect Advantages
This fitting was designed to meet the needs of the motion control industry where fast assembly, dis-assembly and re-assembly is important. No special tools needed for tube assembly, just insert the tubing until it bottoms.
Composite Push-to-Connect is designed to be used without a tube support, providing full flow through the tubing. The grab ring design grips the tubing securely to provide retention.
Composite Push-to-Connect external pipe threads come with a preapplied white PCTFE sealant. Positional external pipe threaded ends are featured on shapes for installion in compact areas and for precise positioning.
Specifications:
This fitting was designed to meet the needs of the motion control industry where fast assembly, dis-assembly and re-assembly is important. No special tools needed for tube assembly, just insert the tubing until it bottoms.
Composite Push-to-Connect is designed to be used without a tube support, providing full flow through the tubing. The grab ring design grips the tubing securely to provide retention.
Composite Push-to-Connect external pipe threads come with a preapplied white PCTFE sealant. Positional external pipe threaded ends are featured on shapes for installion in compact areas and for precise positioning.
Specifications:
- -4ºF to +175ºF at up to 290 psi depending on tubing being used.
- Vacuum applications are dependent upon temperature and type of tubing being used.
- Tube sizes are determined by the number of sixteenths of an inch in the tube O.D.
Composite Push-to-Connect fittings were designed as an economical alternative for pneumatic applications. Ready to use, compact,one-piece fitting for use with most thermoplastic tubing.
Composite Push-to-Connect shaped fittings have a composite body with nickel plated brass componentry.
| Materials | ||
| Component | Material | |
| Body | Glass Reinforced Nylon 6.6 | |
| Collar | Nylon | |
| Gripping Ring | Stainless Steel | |
| D Seal | Nitrile | |
| O-Ring | Nitrile | |
| Base | Nickel plated brass with Thread sealant on tapered components and captive seal on parallel threads | |
| Double Y Union - Inch | ||||||
| Tube O.D. 1 |
Tube O.D. 2 |
Mounting Hole Dia. |
H | L | N | Part Number |
| inch | inch | inch | inch | inch | inch | |
| 5/32 | 5/32 | 0.15 | 1.00 | 1.20 | 0.39 | P54411 |
| 5/32 | 1/4 | 0.15 | 0.87 | 1.47 | - | P54414 |
